Paradyne BitStorm 2400, User Manual

Page: 72 / 90

A. Monitoring and Troubleshooting
A-2
December 2002 2400-A2-GB20-10
Table A-3 lists problems when the BitStorm 2400 is running.
Table A-3. Problems When the BitStorm 2400 is Running
Symptom Possible Problem Possible Solutions
Connection to a network
device is lost (the LED for
the connecting port is off) A cable-related problem:
!
Disconnected cable
!
Damaged cable
Make sure the connectors at both ends of the cable are
securely seated in the desired ports.
Make sure the cable is not physically damaged. If it is
damaged, replace it with a similar cable.
Improperly functioning
network interface card
(NIC) on PC or
workstation Run the diagnostic supplied by the vendor on the NIC to make
sure it is functioning properly. If it is not, replace it.
If the problem continues after these checks, call your reseller.
The throughput of data
via the connection is less
than what you expected The switch might be
connected to a device
which is running slower
than what you expected Check the other device.