2400-A2-GB20-10
December 2002
4-1
4
Using the Web Interface
Overview
The BitStorm 2400 supports a web interface that can be used to perform some
more elaborate configuration functions that the asynchronous terminal interface
does not address, such as:
!
Changing the operational characteristics of the device by setting configuration
values
!
Displaying system status
!
Performing diagnostics
To access the web-based IP DSLAM configuration pages, you can connect to the
BitStorm 2400 IP DSLAM through its:
!
Out-of-band management port, labeled MGMT, or
!
In-band ports, labeled GigE1 or GigE2.
Be aware that the GigE ports are not secure, therefore it recommended that there
be a secure gateway or firewall in place before using these ports.
Web Interface Login
Using a web browser, access the main page by typing the following URL:
http://
address
, where
address
is the IP address you previously defined in the
terminal interface configuration. Once the URL is entered in the web browser, the
login page appears.
Summary of Contents for BitStorm 2400
