Paradyne BitStorm 2400, User Manual

Page: 34 / 90

3. Using the Asynchronous Terminal Interface
3-6
December 2002 2400-A2-GB20-10
Port Statistics Screen
The Port Statistics screen is shown in Figure 3-4 . The Port and PHY settings are
displayed in this screen.
Figure 3-4. Port Statistics Screen
Select one of the fields by using the Tab or arrow keys. Scroll through the values
by pressing the spacebar. The values displayed are automatically updated every
few seconds.
You can modify the following information:
Select APPLY or SAVE when finished.
Field Description
Unit Select the unit in case of multiple units. You can only select 1 in this
configuration.
Port Select the port number from 1 to 26.
State You can select the state for each port. States are Enable and Disable.
Set Speed You can leave the BitStorm 2400 to determine the speed automatically
(autonegotiate) or select one of the following:
!
Autonegotiate: The port speed is selected according to the connected
device.
!
Half-10: 10 Mbps, half-duplex
!
Full-10: 10 Mbps, full-duplex
!
Half-100: 100 Mbps, half-duplex
!
Full-100: 100 Mbps, full-duplex
!
Full-1000: 1000 Mbps, full-duplex