Paradyne BitStorm 2400, User Manual

Page: 56 / 90

4. Using the Web Interface
4-14
December 2002 2400-A2-GB20-10
Procedure
To create a new entry in the SNMP Target Parameters Table:
1. Select New from the Entry pull-down box.
2. Fill in the new information in the following fields:
3. Click on Apply to add the new entry.
To remove entries from either table, select the desired row in the Entry pull-down
box of the corresponding table and click on Delete.
Field Description
Name Unique string identifier.
MP Model Specifies the message-processing model to be used when
generating SNMP messages. This field holds an integer
identifier that uniquely identifies a message-processing model
of the Message Processing Subsystem within the SNMP
Management Architecture. The following options are available:
!
0 – specifies the SNMP version 1 model
!
1 – specifies the SNMP version 2c model
!
2 – specifies the SNMP version 2u and version v2* models
!
3 – specifies the SNMP version 3 model
Security Model Specifies the security model to be used when generating
SNMP messages. This field holds an integer identifier that
uniquely identifies a security model of the Security Subsystem
within the SNMP Management Architecture. The following
options are available:
!
0 – specifies that no specific security model is requested:
!
1 – specifies the SNMP version 1 security model
!
2 – specifies the SNMP version 2c security model
!
3 – specifies “user-defined” security model (USM)
Security Name Security Name (community string) that identifies the Principal
when SNMP messages are sent.
Security Level Level of security to be used when generating SNMP messages.
The following options are available:
!
noAuthnoPriv
!
authNoPriv
!
authPriv
Storage Type Storage type for this row.