Paradyne BitStorm 2400, User Manual

Page: 45 / 90

4. Using the Web Interface
2400-A2-GB20-10 December 2002
4-3
Configuring the System
The logo page allows you to navigate the management web pages. In the left
frame of the browser, there is a navigation tree. Simply click on the + signs next to
each folder to expand.
The following options are used to manage and configure the BitStorm 2400:
!
Management Configuration
!
Notification (Traps)
!
Spanning Tree
!
VLANs/Multicast Groups
Each of these pages will display all or some of the commands listed in Table 4-1 .
Management Configuration
Within Management Configuration, you can configure the following:
!
Switch
!
System
!
Port Configuration/Statistics
!
Serial
!
Password
Table 4-1. Web-based Configuration Commands
Command Description
Apply This command will apply all the modifications to the current configuration.
These modifications will not be stored in NVRAM and will be lost the next
time you reset or power off the switch.
Save This command will apply all the modifications to the current configuration
and will save all information. The configuration will be saved even when
the switch is reset or powered off. Do not turn the switch off before Save
is completed.
Next This command will display the next page of entries if there are more
entries than space on the screen.
Refresh This command will refresh the information on the page. This is necessary
if you want to display the latest information such as statistics.
Delete This command will delete the specified information from the tables.