Paradyne ACCULINK 3150, Operator'S Manual, Page: 83 / 234

6. Using the Integral Modem
3150-A2-GB24-10 March 2001
6-7
Disconnecting the Modem Connection
The Disconnect command enables you to force a disconnect of an active modem
connection from the front panel of the CSU. This command is only available when
the CSU modem is connected.
Disconnect methods include:
„
Using the Disconnect command via the front panel menu (for all dial
connections, or when a pass-through connection is established to another
3150 CSU).
„
Pressing and holding the and front panel keys simultaneously (when a
pass-through connection is established to a remote device other than a
3150 CSU).
Procedure
To disconnect an established modem connection using the Disconnect command:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
4. From the Call Setup screen, select Disc.
The modem call is disconnected and the Command Complete screen
appears.
F1 F2 F3
Control:
Call Rel ClrReg
F1 F2 F3
Call Setup:
Disc ChDir
F1
F2 F3
Disconnect:
Command Complete