Paradyne ACCULINK 3150, Operator'S Manual, Page: 190 / 234

F. SNMP MIB Objects
F-22
March 2001 3150-A2-GB24-10
Table F-1. SNMP MIB to Front Panel Command Cross-Reference (1 of 2)
Front Panel SNMP MIB Object
Stat–>DevHS:
LOS at NET
OOF at NET
Yellow at NET
AIS at NET
EER at NET
Read the dsx1LineStatus object for NET T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
dsx1OtherFailure
Stat–>DevHS:
LOS at DTE
OOF at DTE
Yellow at DTE
AIS at DTE
Read the dsx1LineStatus object for DTE T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
Stat–>Perf–>Telco–>Cur:
CurTimer
ES
UAS
SES
BES
Read the value in the following objects for NET T1
dsx1TimeElapsed
dsx1CurrentES
dsx1CurrentUAS
dsx1CurrentSES
dsx1CurrentBES
Stat–>Perf–>Telco–>Intvl–>Dsply:
ES
UAS
SES
BES
VldIntvl
Select the interval number with dsx1IntervalNumber. Read the value
in the following objects for NET T1
dsx1IntervalES
dsx1IntervalUAS
dsx1IntervalSES
dsx1IntervalBES
dsx1ValidIntervals
Stat–>Perf–>Telco–>24Tot:
VldIntvl
ES
UAS
SES
BES
Read the value in the following objects for NET T1
dsx1ValidIntervals
dsx1TotalES
dsx1TotalUAS
dsx1TotalSES
dsx1TotalBES
Stat–>Tstat:
LLB Test Active
PLB Test Active
RLB Test Active
DLB Test Active
1–8 Test Active
QRSS Test Active
Monitoring QRSS
Read:
dsx1LineLoop from dsx1LoopbackConfig for Net T1
dsx1PayloadLoop from dsx1LoopbackConfig for Net T1
dsx1PayloadLoop from dsx1LoopbackConfig for DTE T1
dsx1LineLoop from dsx1LoopbackConfig for DTE T1
dsx1SendOtherTestPattern from dsx1SendCode for Net T1
dsx1SendQRS from dsx1SendCode for Net T1
testMonQRSS from ifExtnsTestType for Net T1
Stat–>ID:
Ser
Mod
SRev
HRev
Read the sysDescr object from the System Group
Test–>Rlpbk–>LLBUP Set dsx1SendCode to
dsx1SendLineCode
Test–>Rlpbk–>LLBDN Set dsx1SendCode to dsx1SendResetCode
Test–>Lpbk–>LLB
Test–>Lpbk–>Abort–>LLB
Set dsx1LoopbackConfig for Net T1 to
dsx1LineLoop
Set dsx1LoopbackConfig for Net T1 to dsx1NoLoop