Paradyne ACCULINK 3150, Operator'S Manual, Page: 173 / 234

F. SNMP MIB Objects
3150-A2-GB24-10 March 2001
F-5
The supported ifIndexes for the 3150 CSU are:
„
Net T1
„
DTE T1
„
COM port
„
Modem port
The supported ifIndexes for the 3151 CSU are:
„
Net T1
„
DTE T1
„
COM port (if configured)
Interface Group – “ifDescr” Object (ifEntry 2)
This object provides information about the interface. Each interface displays a text
string as shown below:
Interface Group – “ifType” Object (ifEntry 3)
This object identifies the type of the interface based on the physical/link protocol(s)
immediately below the network layer. Only the following values are supported by
the CSU:
„
ds1 – Used for the network and DTE interfaces.
„
propPointToPointSerial(22) – Used for the MODEM or COM port when the port
is not configured as the SNMP management interface.
„
ppp(23) – Used for the MODEM or COM port when the port is configured for
PPP.
„
slip(28) – Used for the MODEM or COM port when the port is configured for
SLIP.
Network T1: “Network T1. [ Company Name ] T1 CSU, Hardware
Version: [CCA number for the CSU board]”.
DTE T1: “DTE T1. [
Company Name
] T1 CSU, Hardware Version:
[CCA number for the CSU board]”.
COM: “COM port. [ Company Name ] T1 CSU, Hardware Version:
[CCA number for the CSU board for the standalone, or the
CCA number for the DSU board for the carrier]”.
Modem: “MODEM port. [ Company Name ] T1 CSU, Hardware
Version: [CCA number for the CSU board]”.