Paradyne ACCULINK 3150, Operator'S Manual, Page: 128 / 234

C. Configuration Options
C-6
March 2001 3150-A2-GB24-10
General Configuration Options
Table C-3. General Configuration Options
Tst Timeout: Enab
Next Enab Disab Prev
Test Timeout. Specifies whether user-initiated loopback and pattern tests have durations
that are specified by the Tst Duration configuration option.
Enab
–
Loopback and pattern tests initiated on the CSU have specified durations.
Disab
–
Disables test timeout. The tests are terminated manually.
NOTE: For CSUs that are remotely managed through an inband data stream such as
EDL or FDL, the recommended setting is Enab. If tests are inadvertently left in the
active state, the Enab setting will allow the test to timeout (terminate) after a specified
time.
Tst Duration: 10
Next Up Down Save Prev
Test Duration. Specifies the duration (1 to 120 minutes) of user-initiated loopback and
pattern tests. (The Tst Timeout configuration option must be set to Enab.) Use the left or
right arrow key to position the cursor on the digit you want to change. Use the Function
keys (Up or Down) to increment or decrement the digit.
Up
–
Increments the test duration.
Down
–
Decrements the test duration.
Save
–
Stores the test duration.