manualshive.com logo in svg

Paradyne ACCULINK 3150, Operator'S Manual, Page: 201 / 234

Share
Download
Paradyne ACCULINK 3150 Operator'S Manual Download Page 201

H. Front Panel Emulation

3150-A2-GB24-10

March 2001

H-3

Starting Front Panel Emulation

If the CSU selected is not locally attached to the PC, you must first dial to the 
remote CSU before starting front panel emulation. The modem attached to the PC 
must support AT commands for the Front Panel Emulation software to successfully 
place the call.

Procedure

 

To start front panel emulation:

1. From the PC, open Program Manager from Windows.

2. Double-click on the Front Panel icon that appears after the Front Panel 

Emulation program is installed on the PC. The Front Panel window opens.

3. Double-click on the Front Panel icon that appears in the Front Panel window. 

The Front Panel Emulation screen appears.

4. Enter the Com Port and Speed from the drop-down selection list boxes. 

The Com Port field needs to contain the actual communications port name as 
recorded in the Windows information file (INI).

The Speed field needs to contain one of the following communications 
speeds: 1200, 2400, 4800, 9600, 14400, 19200, or 38400 and should match 
the CSU’s COM port configuration.

Summary of Contents for ACCULINK 3150











































































































































































































































Reviews:

No comments