![background image](http://html1.mh-extra.com/html/paradox/spectra-1725/spectra-1725_programming-manual_3707859033.webp)
Spectra Series
31
DISARMING & DEACTIVATING AN ALARM
To disarm an already armed system or to deactivate an alarm simply key in a valid access code. Program a designated entry/exit
point, such as the front door or the garage door with an
Entry Delay Timer
. When these entry/exit point are opened (breached), it
will set off a timer. The system will not generate an alarm until this timer elapses, giving users enough time to enter the premises
and disarm the system. Any user can disarm the system, except users have been assigned the
Arm Only Option
.
REGULAR ARMING
This method, commonly used for day-to-day arming, will arm all the zones in the selected partition.
If you make a mistake, the keypad will emit a "
REJECTION
BEEP
". When you have correctly armed the system, the appropriate
"
ARM
" indication will turn on and the
Exit Delay
will be initiated. Please note that
Regular Arming
can also be activated using
Auto-Arming
, a
Keyswitch
or using
One-Touch Arming
.
STAY ARMING
This method allows users to remain in the protected area while partially arming the system. For example, when going to sleep
at night, entry/exit points like doors and windows can be armed while other zones like motion detectors remain deactivated.
Please note that
Fire Zones
can not be bypassed.
If you make a mistake, the keypad will emit a "
REJECTION
BEEP
". When you have correctly
Stay Armed
the system, the appropriate
“
ARM
” indication will appear and the
Exit Delay
will be initiated.
Stay Arming
can also be activated using
Auto-Arming
,
Keyswitch
Arming
or using
One-Touch Arming
. Also note that the User Code must have the
Stay Arming Option
enabled.
How Do I Disarm the System or Deactivate an Alarm?
1) Key in your
[
ACCESS
CODE
]
The arm or alarm indication will turn off and the keypad will emit a “
CON
-
FIRMATION
BEEP
”.
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
2) Press the button corresponding to the partition you wish to
Disarm
or
to
Disarm
both partitions, press the
[1]
key then after the
confirmation beep press the
[2]
key.
How Do I Regular Arm?
1) Green “
READY
” indicator must be illuminated. Unless the system is
partitioned, in which case all zones in the desired partition must be closed.
2) Key in a valid
[
ACCESS
CODE
]
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
3) Press the button corresponding to the partition you wish to
Arm.
To
Arm
both partitions, press the
[1]
key then after the confirmation
beep press the
[2]
key.
How Do I Stay Arm?
1) All zones in the desired partition (except
Stay Zones
) must be closed.
2) Press the
[
STAY
]
button
3) Key in a valid
[
ACCESS
CODE
]
IF YOU HAVE ACCESS TO BOTH PARTITIONS:
4) Press the button corresponding to the partition you wish to
Stay Arm.
To
Stay
Arm
both partitions, press the
[1]
key then after the
confirmation beep press the
[2]
key.