Spectra Series
9
HOW DO I SET THE PROGRAMMABLE OUTPUTS?
Section #
Event Group #
Sub-Group #
Partition #
[120]
= PGM1 Start Event
___/___
___/___
___/___
[121]
= PGM1 Stop Event
___/___
___/___
___/___
Can be used as another Start Event if
section [066] is programmed with a
value other than 000.
[122]
= PGM2 Start Event
___/___
___/___
___/___
[123]
= PGM2 Stop Event
___/___
___/___
___/___
Can be used as another Start Event if
section [067] is programmed with a
value other than 000.
[124]
= Global PGM Start Event ___/___
___/___
___/___
[125]
= Global PGM Stop Event ___/___
___/___
___/___
Used to activate PGMs on
expansion modules and LCD keypads
(see page 22 and page 25)
Example: section [120] = 05 03 02: this means PGM1 will activate whenever partition 2 is Stay Armed.
Event Group #
Sub-Group #
00 = Zone OK
01-16 = Zones 1 to 16
99 = Any Zone
01 = Zone Open
01-16 = Zones 1 to 16
99 = Any Zone
02 = Partition Status
00 = System not ready (
Partition 1 only
)
01 = System ready (
Partition 1 only
)
02 = Steady Alarm in Partition
03 = Pulsed Alarm in Partition
04 = Pulsed or Steady Alarm in Partition
05 = Alarm in Partition Restored
06 = Bell Squawk Activated (
Partition 1 only
)
07 = Bell Squawk Deactivated (
Partition 1 only
)
99 = Any Sub-Group
03 = Global Disarm with User Code
01-48 = User Code Numbers 001 to 048
99 = Any User Code
04 = Special Global Disarm
00 = Disarm with WinLoad Software
01 = Disarm with Keyswitch
99 = Any Sub-Group
05 = Non-Reportable Events
00 = Telephone Line Trouble (
Partition 1 only
)
01 = [
PG
] or [
FNC1
] key was pressed (
Partition 1 only
)
02 = Instant Arming
03 = Stay Arming
04 = Force Arming
05 = Fast Exit (Force & Regular Only)
06 = PC Fail to Communicate (
Partition 1 only
)
07 = Midnight (
Partition 1 only
)
08 = Ground start (
Partition 1 only
)
99 = Any Sub-Group (
Partition 1 only, except 02 to 05
)
01 = Partition 1
02 = Partition 2
99 = Any Partition
Sub-Groups proceeded by
(Partition 1 only)
cannot be
assigned to activate in partition 2.
