Operation manual of solar controller SR658
Page 93 of 105
If there is any wrong operation, just reopen the controller and repeat above steps.
Note:
The controller will only search the file named "SR658.bin" (firmware update
program) on the root directory of MicroSD memory card. detailed update steps, see
paragraph 8.
Data logging
Insert the MicroSD card into the slot of controller, Logging will start immediately.
Data logging frequency on the SD card (LOGI)
Under menu OSDC/LOGI to set the data logging frequency
Completing data logging process (REMC)
Select menu REMC, “YES” displays on the screen, press “SET”, cursor will move to the
“YES”, and press “SET” continuously, extract card order runs, after running, “SUCC” appears
on the screen, then SD card can be taken out from the controller.
Formatting the MicroSD card (FORM)
Select the menu FMTSD,
“YES” displays, press “SET” to move the cursor to “YES”, press
“SET” continuously until “WAIT” displays, card formatting order starts to run, it lasts ca. 10
seconds, after formatting
, “SUCC” will displays, the content of the card will be deleted and
card will be formatted with the FAT file system.
Saving the parameter set on SD card (SAVE)
Select the menu SAVE to save the controller parameters on the MicroSD card.
Select the menu SAVE,
“YES” displays, press “SET” to move the cursor to “YES”, press
“SET” to run save order, after saving, “SUCC” will displays.
The controller parameters are save in a file named
“SR658.DAT”.
Uploading controller parameters (LOAD)
Upload controller parameter from SD card to the controller, controller parameters are saved
in the file named “SR658.DAT” on SD card, select menu “LOAD”, “YES” displays, press “SET”
to move the cursor
to “YES”, press “SET” continuously to run file loading, and then “SUCC”
will be indicated on the display.
