Operation manual of solar controller SR658
Page 47 of 105
►Press “↑”, “CYCFS ON” displays on the screen (three time - sections flow control, default
activated)
►Press “SET” button, “ON” blinks
►Press “↑”, “↓” button to activate the function, “CYCFS OFF” displays on the screen
►Press “SET” or “ESC” button, to confirm the setting
►Press “↑”, “STAT ON” displays on the screen (start condition of the temperature control,
this function is only available when the temperature control mode is activated, under the flow
control mode, this function is invalid)
►Press “SET” button, “ON” blinks (default set)
►Press “↑”, “↓” button to activate the function, “STAT OFF” displays on the screen
►Press “SET” or “ESC” button, to confirm the setting
►Press “↑”, “CYCO 40
o
C
” displays on the screen ( if flow control CYCFS ON
，
then here
displays “CYCO 03Min”, here take temperature as example)
►Press “SET” button, “40
o
C
” blinks
►Press “↑”, “↓” button to adjust the switch-on temperature of DHW circuit pump, adjustable
range 0
o
C ~ (OFF-2
o
C)
►Press “SET” or “ESC” button, to confirm the setting
►Press “↑”, “CYCF 45
o
C
” displays on the screen
►Press “SET” button, “45
o
C
” blinks
►Press “↑”, “↓” button to adjust the switch-off temperature of DHW circuit pump, adjustable
range (ON+2
o
C) ~ OFF
►Press “SET” or “ESC” button, to confirm the setting
►Press “↑”, “tC1O 05:00” displays on the screen, to set the start time of the first time-section.
►Press “SET” button, hour time “05” blinks
►Press “↑”, “↓” button to adjust time hour of the start time of the first time-section
►Press “SET” button, minute time “00” blinks
►Press “↑”, “↓” button to adjust time minute of the start time of the first time-section
►Press “SET” or “ESC” button, to confirm the setting
►Press “↑”, “tC1F 07:00” displays on the screen, to set the close time of the first
time-section.
