BA_PH_BSB-400-900_EN_44-21.docx
41
13.4
Mitre Fence “Top”
The mitre fence with round rod guide makes work easier when sawing angles and mitres. It can be folded down
by 90° so that even flat workpieces (at the prescribed distance of max. 5 mm from the saw blade guard) can be
processed safely. The adjustable angle range is ± 60°.
Figure 42: Mitre fence
“
Top
”
Install Mitre Fence:
•
The two holding plates (
P
) are already attached
to the rail (
F
) and the table in the factory
9
.
•
Insert the mitre fence (
G
) with round rod from
above into the two black holding plates (
P
).
•
To clamp the fence, tighten the two tighten the
two screws (
S
).
Art. No. and further accessories see chapter
13.5
Table Extension
Figure 43: Table extension
The optional table extension (including mounting rails) replaces an as-
sistant and provides valuable support when machining large and long
workpieces. It is easy to move, quick to remove and can be quickly
mounted to the mounting rail via a clamping lever. The base is foldable
and locks automatically, which ensures a small space requirement
when folded.
Art. No. and further accessories see chapter
13.6
Kreisfix for Circular Cuts
Figure 44: Kreisfix for circular cuts
The Kreisfix is a practical aid for sawing circular workpieces. It enables
precise sawing of round arcs and discs, without the need for scribing.
A prerequisite for correct mounting is that the machine is equipped
with the table extension (see section
13.5). When machining work-
pieces with large diameters, it is recommended to use a second table
extension.
Art. No. and further accessories see chapter
13.7
Machine Moving Trolley
Figure 45: Machine moving trolley
With the optional mobile trolley, you can make your bandsaw mobile
and are no longer tied to a stationary installation site. This allows you
to move your machine quickly and conveniently to any desired location
in your workshop or joinery.
The trolley for easy transport consists of two swivel castors with brakes
and two fixed castors.
Art. No. and further accessories see chapter
Note:
This option is not available for the bandsaw model BSB 900.
9
For later retrofitting, the retaining plates (
P
) must be attached to the rail and table by the customer.
G
S
S
P
P
F
