BA_PH_BSB-400-900_EN_44-21.docx
42
13.8
Laser Cut Position Indicator (Option for BSB 600 - 900)
As an option, the bandsaw models BSB 600 to BSB 900 can be equipped with a laser cut position indicator (laser
class 1M). This provides optical support during cutting by projecting the cutting edge onto the workpiece. The
workpiece can thus be optimally aligned before cutting in order to keep waste as low as possible.
Figure 46: Laser device
Seen from the direction of the workplace, the laser de-
vice is installed behind the saw blade guard and tilted
in the direction of the machine.
Figure 47: Laser cutting edge
The laser beam projects the exact cutting edge onto
the workpiece and thus provides valuable support dur-
ing cutting.
13.8.1
Special Features of Use
•
The installed laser must not be replaced by a laser of a different type.
•
No additional optical devices may be used.
•
Laser repairs may only be carried out by the laser manufacturer or by authorised persons.
Caution: Looking directly into the laser beam will cause serious eye injury!
The operating instructions of the laser manufacturer must be observed.
The Art. No. for the laser directional light as well as other accessories can be found in chapter
