June 2022
7
VeriSafe 2.0 AVT
Quiescent Current
Battery Powered
Per Phase: 0 .85 mA rms @ 480 Vrms; 1 .2 mA rms @ 1000 Vrms
Auxiliary (DC or PoE) Powered Per Phase: 0 .33mA rms @ 480 Vrms; 0 .65mA rms @ 1000 Vrms
Voltage Presence Indicators (Red LEDs) - Voltage Illumination Level
Voltage
Illumination Level
AC System Voltage
DC System Voltage
Three-Phase
Single-Phase
3-Wire Center Ground
Positive or Negative Ground
Isolated Ground
Battery Powered
50 VAC
60 VAC
90 VDC
55 VDC
90 VDC
Auxiliary Powered
(DC or PoE)
50 VAC
50 VAC
50 VDC
50 VDC
50 VDC
Functional Safety
Mode of operation
Continuous, High Demand
Failure Rate
ʎ
SD 488
ʎ
SU 235
ʎ
DD 267
ʎ
DU 9
SFF 99 .1%
Supported Safety Integrity Levels
SIL3
Demand Response Time
8 .5 Seconds
Device Type
Type A
Systematic Capability
SC 3
Error Handling Response Time
12 .1 Seconds
Reference Report
PAN 19/08-093 R001
Operating Modes
SIL mode only
Hardware Fault Tolerance (HFT)
0
Standards and Certifications
UL 1436
Standard for outlet circuit testers and similar indicating devices
CAN/CSA-C22 .2 No . 160
Voltage and polarity testers
IEC / UL / CSA C22 .2 NO . 61010-1
IEC / UL / CSA C22 .2 NO . 61010-2-030
Safety requirements for electrical equipment for measurement, control, and laboratory use
UL 508 & CSA-C22 .2 No . 14
Industrial control equipment
IEC 61508-1, -2, and -3 {SIL 3 Rating} Functional safety of electrical/electronic/programmable safety-related security systems
FCC - CFR 47 Part 15 Subpart B
Radio frequency devices
CAN ICES-001, CAN ICES-003
Industrial, scientific and medical (ISM) radio frequency generators
EN 55011, CISPR 11, KS C 9811,
AS/NZS CISPR 11
Radio frequency disturbance characteristics
IEC 61326-1, -3-1, -3-1: corr 1
EN 61326-1, -3-1
EMC and immunity requirements
IEC / EN 61000-3-2, -3-3, -6-2
KS C 9610-3-2, -3-3, -6-2, -6-4
Electromagnetic compatibility (EMC)
CE
UKCA
Conformity Marking for European Economic Area
Conformity Marking for United Kingdom
RoHS
Restriction of hazardous substances
NOTE:
By design and installation guidelines the VeriSafe 2 .0 AVT is not impacted by the occurrence of phenomena from IEC 61000-4-16
