Panduit VerySafe VS2-AVT Series Instruction Manual Download Page 1

VeriSafe

 2.0 Absence of Voltage Tester (AVT)

Instruction Manual

Lit. No.:  B21110

Date: 

 June 2022

 

         Revision:  

0

Model No(s):

VS2-AVT Series

Table of Contents

NOTE:

  In the interest of higher quality and value, Panduit

 products are continually being improved and updated. Consequently, pic-

tures may vary from the enclosed product.  

NOTE:

  Updates to this Instruction Manual may be available.  Check www.panduit.com for the latest version of this manual.

TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL

TM

For a copy of Panduit product warranties, log on to www.panduit.com/warranty

For more information 

Visit us at www.panduit.com/verisafe

North America Tech Support:  

[email protected]  

Tel: 866.405.6654  

EU Tech Support :   

[email protected]  

Tel: 31.546.580.452  

Fax: 31.546.580.441

Asia Pacific Tech Support:  

[email protected]  

Tel:   

Singapore: 1-800-Panduit (7263848)  

Australia: 1-800-Panduit (7263848)  

Korea: 02.21827300

Tech Support

Safety Information 

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2

Informations relatives à la sécurité

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3

System Configuration

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4, 5

Components    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Part Number Identification     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Power for AVT Test    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
DC Power Input    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Indicator Module    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Absence of Voltage Outputs     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5

Technical Specifications

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6, 7

Environmental Ratings, Applications   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
Hazardous Locations, AVT Power Requirements   .  .  .  .  .  .  .  .  .  .  .6
AVT Quiescent Current, Voltage Illumination Level  .  .  .  .  .  .  .  .  .  .7
Functional Safety   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Standards and Certifications    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7

Dimensions

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8

Schematics

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9, 10

3-Phase Delta, 3-Phase Wye    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9
Single Phase    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9
DC    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .10

Installation Considerations 

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11

General Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Effect on SCCR    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Use of Overcurrent Protection   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11

Installation Instructions

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .12, 13

Commisioning Checklist

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .14

Operating Instructions

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .15

Troubleshooting

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16

Maintenance

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .17, 18

Warranty

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .19

The VeriSafe

 2 .0 Absence of Voltage Tester (AVT) is a permanently-mounted tester that is used to verify a circuit is de-energized prior 

to opening an electrical enclosure . Once installed, a push of a button enables personnel who have been trained on the operation of the 

tester to verify the absence of voltage and see an active indication when the absence of voltage is confirmed .

Summary of Contents for VerySafe VS2-AVT Series




















Reviews: