Panasonic Workio DP-C305, Service Manual

Page: 916 / 920

SD Card Firmware Writing Tool
Page 6
4. Creating a Master Firmware SD Memory Card
1
Insert SD Memory Card into the SD Memory Card Reader/Writer of your PC.
Note:
Please check the SD Memory Card Reader/Writer before this procedure begins to ensure it
works properly.
The SD Card must contain at least 100 megabytes of free space, otherwise
the operation will fail.
2
From the Windows Desktop, double-click on
the
SD Memory Card Firmware Writing
Tool
shortcut icon to start the tool.
Note:
If a shortcut was not created to the
Windows Desktop at the time of installation,
click the
Start
button on the Taskbar, point to
(All) Programs
►
Panasonic
►
Panasonic
Firmware Update
, then select
SD Memory
Card Firmware Writing Tool
.
Click [
Browse
] of Source Firmware parent file
folder.
3
Select the Parent File Folder
(For example
DP-C322_C262_PU_20060615)
and Click
[
OK
].
4
Select the drive letter that the SD Card Reader
Writer is mounted.
For example:
H: (Removable Disk)