Panasonic Workio DP-C305, Service Manual

Page: 584 / 920

584
DP-C405/C305/C265
FEB 2008 Ver. 1.1
5.2.6. Fax Service Mode 6 (RAM Initialization)
Initializes RAM, and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Set the machine to Service Mode, and press the “9” key on the Control Panel.
↓
Press the “Start” key to enter the F9 Service Mode on the Control Panel.
↓
Select “00 Fax Service Mode” on the Touch Panel display.
↓
Scroll the menu with the “ ” button on the Touch Panel display, and select “06 RAM Initialize” .
↓
Select the desired Mode on the Touch Panel display, and then select the “Yes” button (initialize RAM),
or the “No” button (cancel).
↓
Select the “Close” button four time on the Touch Panel display.
↓
Press the “Function” , and the “C (Clear)” keys simultaneously on the Control Panel to exit the Service
Mode.
RAM Initialization Table
No. Initialize Mode Description
01 PARAMETER INITIALIZE Restores the Fax, and Function Parameters to default values.
Note: Turn the Power Switch to the OFF , and back to the ON
position to enable the parameter settings.
02 JOURNAL CLEAR Clears the Journal contents.
03 AUTO DIAL CLEAR Clears the One-touch, ABBR Numbers, and Phone Books.
04 PROGRAM DIAL CLEAR Clears the Program keys.
05 LOGO/ID/PSWD CLEAR Clears the Logo, ID, Polling Password.
06 LBP ERROR LOG CLEAR Clears the Printer Error Log.
07 SHIPMENT SET Deletes all setting information, except parameter number 80
and 81, then set default values.
08 FLASH MEMORY CLEAR Deletes all information in the Flash Memory.
09 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.