Panasonic Workio DP-C305, Service Manual

Page: 452 / 920

452
DP-C405/C305/C265
FEB 2008 Ver. 1.1
J38 The Fuser Entrance Sensor (4928) detects ON position within predetermined time.
(DP-C405/C305) Fuser
The Fuser Entrance Sensor ( 4928 ) does not go On within a predetermined time.
( DP-C265 , DP-C354/C322 Series)
J39 1. The Fuser Entrance Sensor (4928) detects paper before the start of initialization.
2. The Fuser Entrance Sensor (4928) detects paper during initialization.
3. The Fuser Entrance Sensor (4928) detects paper before the Registration Roller
starts rotating.
J40 The Fuser Unit Paper Exit Sensor (1819-32) does not detect paper within a
predetermined time after the Registration Clutch (6128) is activated. (DP-C405/C305)
The Fuser Unit Paper Exit Sensor (1819-32) does not detect paper within a
predetermined time after the Fuser Entrance Sensor (4928) is activated.
( DP-C265 , DP-C354/C322 Series)
J41 The Fuser Unit Paper Exit Sensor (1819-32) does not go Off within a predetermined
time. (ADU)
Fuser
Paper Exit
Transport
J42 1. The Fuser Unit Paper Exit Sensor (1819-32) detects paper before the start of
initialization.
2. The Fuser Unit Paper Exit Sensor (1819-32) detects paper during initialization.
3. The Fuser Unit Paper Exit Sensor (1819-32) detects paper before the Fuser
Entrance Sensor (4928) goes On in printing 1st page.
J43 The Inner Exit Sensor (1819-39) does not detect paper within a predetermined time
after the Fuser Exit Paper Sensor (1819-32) is activated. (Inner Tray)
Paper Exit
J44 The Inner Exit Sensor (1819-39) does not go Off within a predetermined time. (Inner
Tray)
J45 1. The Inner Exit Sensor (1819-39) detects paper before the start of initialization.
(Inner Tray)
2. The Inner Exit Sensor (1819-39) detects paper before the Feed Roller starts
rotating. (Inner Tray)
J50 The Paper Path Sensor (1819-21) (Paper Transport Unit) does not detect paper within
a predetermined time.
Transport
J51 The Paper Path Sensor (1819-21) (Paper Transport Unit) does not detect paper within
a predetermined time. (ADU)
Transport
ADU
J52 1. The Paper Path Sensor (1819-21) (Paper Transport Unit) detects paper before the
start of initialization.
2. The Paper Path Sensor (1819-21) (Paper Transport Unit) detects paper before the
Feed Roller starts rotating. (Outer Tray)
3. The Paper Path Sensor (1819-21) (Paper Transport Unit) detects paper before the
Feed Roller starts rotating. (ADU)
Transport
J54 The Outer Exit Sensor (1819-20) does not detect paper within a predetermined time.
J55 The Outer Exit Sensor (1819-20) keeps does not go Off within a predetermined time.
J56 The Outer Exit Sensor (1819-20) detects paper before initialization.
J60 1. The Finisher Enter Sensor (1819-26 / PI1) does not detect paper within a
predetermined time.
2. The Finisher Enter Sensor (1819-26 / PI1) does not detect paper within a
predetermined time after the Sensor is activated.
3. The Finisher Enter Sensor (1819-26 / PI1) detects paper before the start of
initialization.
Finisher
Jam Error Codes (J Code) Table
Code Contents Section