Panasonic Workio DP-C305, Service Manual

Page: 231 / 920

231
FEB 2008 Ver. 1.1
DP-C405/C305/C265
(7) Install the New Cleaning Unit .
(8) Turn the White Drive Gear Clockwise 5 times to
make sure the IT Belt is turning smoothly.
Note:
* Do Not turn it Counter-Clockwise.
* If the IT Belt is Not turning smoothly, remove the
Cleaning Unit, and repeat steps 5 and 6 again.
(9) Reinstall the IT Belt Unit into the main unit.
(10) Perform “F8-30 Color Registration” in the
Service Mode.
(11) Perform “Manual Copy Quality Adjustment”
1. Before starting, ensure that the unit is in
standby in the Copy Mode, and it is not
displaying any error codes/messages.
2. Press the “Function” key.
3. Select “General Settings” .
4. Select “01 Manual Copy Quality Adj” .
5. Select “On” .
6. Select “OK” to begin the Manual Copy
Quality adjustment.
Note:
Do not touch any keys, or turn the Power Switch
Off until the adjustment cycle stops (approximately
1-2 minutes).
7. Press the “Reset” key, to exit the General
Settings mode.