Panasonic WJ-RT416/G Network Operating Instructions Download Page 41

Page: 41 / 88

Start/stop of the manual recording using this software (Manual Rec. Control)

It is possible to start and stop the manual recording using this software.

Screenshot 1

Select "Manual Rec. Control" from the pop-up menu
(

☞

page 35).

→

The "Manual Rec. Control" window will be displayed.

Step 1

Select "On" or "Off" to start or stop the manual record-
ing.
On:

Starts the manual recording using this software.

Off:

Stops the manual recording using this software.

Step 2

Click the [Apply] button.

→

The selected operation will be carried out.

Check of the system information and disk information of the recorder (Information)

It is possible to check the system information and the disk information of the recorder.
Select "Information" from the pop-up menu (

☞

page 35).

→

The "Information" window will be displayed.

Check the desired information on this window.

Summary of Contents for WJ-RT416/G

























































































Search results

Summary of Contents for WJ-RT416/G

Reviews:

Related manuals for WJ-RT416/G

Brands by name

Popular brands

Panasonic WJ-RT416/G, Network Operating Instructions

Search results

Summary of Contents for WJ-RT416/G

Reviews:

Related manuals for WJ-RT416/G

Brands by name

Popular brands