34
When the recorder is in the “Time” mode, the icon displays at the top-left corner of the screen. The
recorder will record and displays the icon at the top-left corner of the screen during the scheduled times.
When the recorder is in the “Event” mode, the red icon displays at the top-left corner of the screen. The
recorder will record and displays the icon at the top-left corner of the screen when any event occurs. When
the recorder is in the “Pre-Event” recoding mode, the yellow icon displays when there is no event, and the
recorder is not recording. When the recorder is in the “Pre-Event” mode, the red and display when any
event occurs and the recorder starts recoding.
When the recorder is in the “Time & Event” mode, the recorder will follow the Time settings and the icon
displays at the top-left corner of the screen. The recorder follows the Event settings and the icon displays.
Highlight the box under the “Channels” heading and press the button to select which cameras will be
recorded. (Simple Mode Only)
Highlight the box under the “Settings” heading and press the button to define the recording settings.
“
Figure 28: Record – Settings (Advanced Mode) setup screen
You can set the “ips”, “Quality” and “Resolution” (“ips”, “Quality”, “Resolution” and “Dwell” for “Advanced
Mode” setup) of the recording for any modes you set up in the “Mode” column. If you do not set the “ips”,
“Quality”, “Resolution” and “Dwell” in the “Settings” column, the recorder will follow the default settings. See
below for details.
Note: Descriptions of the Record icons in the “Type” column are as follows:
Time-lapse (Time)
Alarm-In
Motion
Video Loss
Video Blind
Text-In
Channels that are not defined will use the setting values of the previous schedule item.
When multiple events are detected at the same time from a specific channel, the recorder will
record event video with the high setting values if the “ips”, “Quality”, “Resolution” and “Dwell”
values of events are different from each other. However, the “ips” will be reset to the supported
maximum value when the “ips”, “Quality”, “Resolution” and “Dwell” are all set to the highest
value. (Advanced Mode Only)
