43
Alarm-Out
Figure 47: Device – Alarm-Out setup screen
Highlighting the box beside “Dwell Time” and pressing the button allows you to set the dwell time of the
alarm output. Dwell times range from 5 seconds to 30 minutes.
Each alarm output can be given its own title by highlighting “Title…” and pressing the button. A virtual
keyboard appears allowing you to enter the title.
You can add and edit alarm output schedules on this screen. Highlight the “+” and press the button to add
a schedule. Highlighting the boxes under the “Column” heading and pressing the button allows you to edit
the information in those boxes.
The “Day” box allows you to select the days that the alarm schedule will be active. The choices are: “Sun”,
“Mon”, “Tue”, “Wed”, “Thu”, “Fri”, “Sat”, “M~F”, “Hol” and “All”.
The “Range” box allows you to set the time that the alarm schedule will be active in 15-minute increments
from 00:00 to 24:00.
The “Mode” box allows you to set how the alarm reacts during the scheduled time. When set to On, the
Alarm-Out is active during the scheduled time. When set to “Event”, the Alarm-Out is only active when there
is an Event during the scheduled time.
The “Channels” box allows you to set which alarm outputs will be active. You can also select the recorder’s
internal buzzer.
The “ ” box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you
really wish to delete the schedule.
