Panasonic WJ-HD716/1000 Operating Instructions Manual Download

Page: 46 / 133

Step 1

Press the [SEARCH] button on the front panel.

→

The recording event list window will be displayed.

Note:

• When using the mouse, click "Search" from the

submenu to display the recording event list win-
dow.

Step 2

Select search filters. Move the cursor onto [Filtering]
by pressing the [SET] button on the front panel, and
then press the [SET] button on the front panel.

→

The "Filtering" window will be displayed.

Time & date

Displays the start time and date of the recording.

Displays the camera channel used for recording.
Playback of images recorded using the displayed
camera channel will start on a 1-screen.

Event

Displays the event type. Refer to page 8 for further
information about the event type.

HDD

Displays the hard disk drive number on which images
were recorded.

Audio

Displays the icon to indicate whether audio is
attached to the data or not.

Time and date range of the listed data

Displays a time and date range of the listed data.

Number of the listed data (Total)

Displays the total number of listed data. When more
than 10 000 data matched, the ">10000" indication
will be displayed.

[Prev page] button

Displays the previous page.

[Next page] button

Displays the next page.

[

] (play) button

Starts playback of recorded images of the selected
recording event.

How to operate

Summary of Contents for WJ-HD716/1000






































































































































Search results

Summary of Contents for WJ-HD716/1000

Reviews:

Related manuals for WJ-HD716/1000

Brands by name

Popular brands

Panasonic WJ-HD716/1000, Operating Instructions Manual

Search results

Summary of Contents for WJ-HD716/1000

Reviews:

Related manuals for WJ-HD716/1000

Brands by name

Popular brands