background image

45

Search and play

Search a desired recorded image and play it. There are the following 3 searching methods. 

  •  Search for recording events and play (recording event search)
  •  Search for time and date when a motion was detected from recorded images and play (VMD search) 
  •  Search for copied recorded images and play (copy data search)

Playback images will be displayed on a 1-screen on monitor 2. To play recorded images on a multiscreen, 
switch to a multiscreen after starting playback. 

Search and play recording events (recording event search)

Display a list of recording events, and then select a desired recording event to play from the list. 
It is also possible to filter recording events using the following search filters. 

Search filter

Search filter

Description

Time & date

Search for images recorded in a time range designated by selecting the start time 
and the end time 

Event

Search for images recorded by the selected recording mode only. 

  •  Recording mode/Event

    Manual recording, schedule recording, emergency recording, video loss, terminal 

alarm, command alarm, video motion detection (VMD), camera site alarm

  •  i-VMD camera alarm 

    Motion detection, object appearance/disappearance, terminal alarm, residence 

detection, direction detection, interruption detection

Camera

Search for images recorded using the selected camera channels only. 

Recording event list

     

[Filtering]

Displays the search filter window on which the search 
filters can be specified. 
     

[Select Medium] button

Displays the disk selection window on which a media 
(HDD, DVD, SDHC/SD memory card) subject to play 
can be selected.
     

Summary of Contents for WJ-HD716/1000






































































































































Reviews: