104
It is possible to manually copy images recorded in the recorder onto a DVD or an SDHC/SD memory card. It is
recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the
hard disk drives.
Refer to page 59 for further information about the copy function.
Copy recorded images
Step 1
Display the top page of the operation window.
(
☞
Page 77)
Step 2
Click the button in the [Copy] box.
→
The data copy window will be displayed.
Step 3
Specify the detailed conditions of recorded images to
be copied.
Date and time range:
Designate the start time and
date and the end time and date of recorded imag-
es to be copied.
Click the [
C
] button, and then designate time and
date.
REC event:
Select an event type of recorded images
from the following. Select the event type by
checking the checkbox corresponding to the
desired event type. The checkbox respective to
the selected event type will be checked. (When
selecting "All", all the checkboxes will be
checked.)
Camera:
Select a camera channel used for recording.
Select the camera channel by checking the
checkbox corresponding to the desired camera
channel. To select all camera channels, select
"All".
Copy drive:
Select a DVD or an SDHC/SD memory
card as a copying destination.
Check the checkbox corresponding to either of
"HDD
→
DVD" or "HDD
→
SDHC/SD memory
card".
Alter detect:
Determine whether or not to attach the
alteration detection code to the recorded images
to be copied.
When the alteration detection code is attached, it
is possible to check if the copied recorded images
have been altered or not when playing the copied
recorded images using the viewer software.
Click the [
C
] button, and then select "On" or
"Off".
Data size:
When the [Measurement] button is clicked,
size of the data to be copied will be displayed.
Remaining capacity:
The remaining capacity of the
destination media (SDHC/SD memory card or
DVD) will be displayed.
Step 4
Click the [OK] button.
→
The data copy window will close. Copying will
start and the [COPY] icon
will be displayed in
the status display area. When copying is com-
plete, the [COPY] icon will disappear.
Note:
• When selecting "DVD Drive" even though an
optional built-in DVD drive is not installed, the
error message of "No media is inserted" will be
displayed.
