23
Operations using a mouse
The recorder can be operated using a mouse connected to the mouse port (
☞
page 11) on the front panel.
Move the mouse cursor onto a button or a tab on the screen, and then click on it.
Note:
• When no operation is made for 10 seconds or more, the mouse cursor will be hidden. The mouse cursor will
be displayed when the mouse is moved.
• It is impossible to connect a mouse to the mouse connection port if the connector from the mouse is upside
down. When it is hard to connect, check the upside down position of the connector from the mouse.
Operations of the operation panel
When right-clicking, the operation panel representing the front panel (the monitor operation button and the
camera selection button on the front panel) will be displayed.
Operations on panels
The following operations can be made by clicking each button.
Refer to the respective pages for further information about each function.
• Change camera channels (
☞
page 30)
• Select the monitor (monitor 1/monitor 2) to operate (
☞
page 29)
• Start/stop the sequence ((
☞
page 34)
• Display/hide the camera title and the status bar (
☞
page 30)
• Change the screen pattern of the multiscreen (
☞
page 32)
Close the panel
Click anywhere outside the operation panel.
