To access the units using the HTTPS protocol, enter as follows:
Example of entry:
https://192.168.0.10/
•
Available number of characters:
1 - 128 characters
•
Default:
(Cam. 1) selfcamera, (Cam. 2 - 16) not registered
IMPORTANT
•
This unit is specified when “selfcamera” is displayed for the IP address or host name.
•
“Network Camera Recorder with Viewer Software Lite” which supports live monitoring and recording
images from multiple cameras is available. For further information, refer to our website
(http://panasonic.net/pss/security/support/info.html).
•
When accessing the unit using the HTTPS protocol, install the security certificate of the camera to
display images on the monitor. (
®
page 81)
Note
•
When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
•
Available number of characters:
0 - 20 characters
•
Unavailable characters:
" &
•
Default:
(Cam. 1) WJ-GXE100, (Cam. 2 - 16) None (blank)
Note
•
When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
•
When displaying images on multi-screen from the unit or network cameras that have the aspect ratio
configured to a setting other than “4:3”, the image will be displayed altered to the aspect ratio of “4:3”.
Operating Instructions
45
9 Configure the multi-screen settings [Multi-screen]
