4
FEATURES
●
A remote surveillance system can be built to monitor
unattended stores and remote places.
• Video, audio and digital data can be transmitted
and received through ISDN (1 line).
• High-quality video can be transmitted and received
by the H.261 or H.263 (ITU standard) system.
Note:
Mutual connection with other codec manufac-
tures is not guaranteed.
• Audio can be clearly received because an echo
canceler is built in.
●
May be combined with a sensor for automatic dialing.
Up to 100 alarm log items can be verified.
• Sensor input port is located on the rear of the AV
Codec. Using this sensor input port, a set telephone
number may be dialed when an externally installed
sensor has operated, thus transmitting video and
audio data.
●
Up to 5 one-touch dial numbers and 200 quick (short)
dial numbers can be registered. Automatic surveillance
by sequential dialing is also available.
• By simply pressing a one-touch dial button, the reg-
istered site of the corresponding number can be
called.
• By registering numbers frequently dialed in the
directory, their sites can be called by a simple step.
If the sequential dialing function is set to ON when
registering quick dial numbers, the registered quick
dial numbers will be automatically dialed in
sequence for surveillance.
●
Up to 5 cameras can be connected.
• There are 5 video input terminals. A Panasonic
combination camera can be connected to video
input terminal 1, through which the pan/tilt head
can be controlled for pan/tilt, zoom and focus.
• Up to 8 view points (video points to monitor) can be
set.
• Panasonic monitor devices can be easily connect-
ed to the RS-485 data port in configuring a system
suited to a particular use.
●
Video storage function capable of recording motion
pictures before sensor input
• Video data before and after an alarm is detected
by the sensor can be stored in the internal memory
of the AV Codec at the transmitter site. (Video stor-
age function) The stored video can later be trans-
ferred to the receiver for verification.
●
Versatile maintenance function (remote setup and trou-
ble analysis)
• The settings at an unattended site can be changed
from the control site.
• Various kinds of recorded information helpful for
trouble analysis can be displayed on the monitor
for verification.
• Operation by unauthorized persons can be pre-
vented by protecting the settings with a password.
HOW TO USE THIS MANUAL
ISDN and other PBX networks are called dial-ups in this
manual. The following symbols are used in the descriptions
given in the manual.
: Item for operation or setup at a remote
site (transmitter) only
: Item for operation or setup at a control
site (receiver) only
: Item for operation or setup in case of
using line exchange
Dial-Up
Receiver
Transmitter
: Item for operation or setup during
line exchange standby only
Dial-Up Standby
