30
0 0 0 T O P
1 0 0 M O D E
↓
( T R A N S M I T T E R )
2 0 0 R E C E I V I N G R E G I .
↓
3 0 0 D I R E C T O R Y / D I A L I N G R E G I .
↓
4 0 0 S E T U P
↓
5 0 0 C O N T R O L
↓
6 0 0 M A I N T E N A N C E
↓
7 0 0 R E M O T E S E T U P E D I T
↓
↑ ↓
: M O V E E N T : S E L E C T E S C : C L E A R
1 0 0 M O D E
M O D E : T R A N S M I T T E R R E C E I V E R
← →
: S E L E C T E S C : P R V
1
Move the cursor to item 100 in the TOP menu
by pressing the
▲
or
▼
button, then press the
ENTER button.
The
[100 MODE]
menu appears on the monitor screen.
2
Select either [TRANSMITTER] or [RECEIVER]
by pressing the
t
or
s
button.
TRANSMITTER:
When the AV Codec is used at a
remote (destination) site.
RECEIVER:
When the AV Codec is used at a control
(local) site.
The factory default setting is TRANSMITTER.
3
Press the ESC button.
After selecting the necessary parameter, press the
ESC
button to return to the previous
[TOP]
menu.
If a setting change is made in the menu, then the dialog
menu for verification appears on the monitor screen.
To change the setting, select
[YES]
by pressing the
t
or
s
button and then press the
ENTER
button. (Continue to
process step 4)
To quit the setting change, select
[NO]
and then press the
ENTER
button. The
[100 MODE]
menu appears again on
the monitor screen.
4
Turn the power off, and then restart the
system by turning the power on.
Tune the AV Codec power off according to the dialog on
the monitor screen. Then turn the AV Codec power on
again.
The system is now in the newly specified setting mode.
First, set the AV Codec operation mode.
d
■
C H A N G E M O D E ?
Y E S N O
← →
: S E L E C T E N T : E X E T E S C : P R V
d
■
P O W E R O F F T H E N P O W E R O N A G A I N
d
If the mode is changed (for example, from Receiver to Transmitter), the existing setting remains valid. After changing the
mode, be sure to check the setting.
Notes
■
Mode Setup ............................................................................................. [100]
SYSTEM SETUP
