27
The Setup Menu enables control of the functions that are not accessible by direct operation.
Access to the Setup Menu is limited to operators with the proper operator’s level.
A setup menu appears on the monitor screen when the
MENU
button on the controller is pressed. The items that can be
selected on the setup menus vary depending on the operating environment shown below.
• Activated Mode
(Remote Site: transmitter or Control Site: receiver)
• Communication Status
(During Communication or on Standby Status)
All the items are shown in the menu examples, but there may be items not shown (– – –) depending on the mode used.
Confirm this by referring to the text.
Observe the following procedures for system setup.
1. Mode Setup
First, select an operating mode (transmitter or receiver).
2. Setup
Set the environment for the local site.
The remote site settings can be changed from the control site during communication. After downloading the remote site set-
tings to the control site, the downloaded data may be modified, and then uploaded back to the remote site, thereby register-
ing or changing the remote site settings.
• To change the settings during communication
The remote site settings can be changed in part from the control site with a menu shown on the monitor during communi-
cation.
• To enter remote site settings using the remote setup function
The remote site settings can be downloaded to the control site and, after changing the settings, can then be uploaded
back to the remote site.
• How to use the maintenance function
This function may be used to initialize the settings or display information.
The settings are stored in the internal memory when the menu is closed. Observe the following precautions during the
setup process.
• If power is switched off while a menu is on the monitor screen, all the settings will be lost.
• If an incoming call is received during setup operation, then the menu items being set up at when receiving the call
will not be stored. If items on two or more menus have been set before receiving an incoming call, however, they
will be automatically stored in the internal memory except for those items being set on the current menu.
• If the line is disconnected while items are being set on a menu during communication, those items on the menu
will not be stored as when receiving an incoming call during the setup process. (If items on two or more menus
have been set before receiving an incoming call, however, they will be automatically stored in the internal memory
except for those items being set on the current menu.)
Caution
SETUP PROCEDURES
