48
●
Alarm Setup [460]
The following procedures are only available when the AV Codec is set to TRANSMITTER in the
[100 MODE]
menu.
This menu lets you set the alarm methods when the codec located at the remote site receives an alarm signal from the associ-
ated alarm sensor.
The destinations called by the alarm dialing are specified with the quick (short) dial numbers previously registered. Before set-
ting this menu, be sure to register the quick (short) dial number in the
[310 DIRECTORY REGI.]
menu.
Transmitter
4 6 0 A L A R M
4 6 1 A L A R M S E T U P
↓
4 6 2 A L A R M D I A L I N G T A B L E 1
↓
4 6 3 A L A R M D I A L I N G T A B L E 2
↓
4 6 4 A L A R M D I A L I N G T A B L E 3
↓
↑ ↓
: M O V E E N T : S E L E C T E S C : P R V
4 6 0 A L A R M
4 6 1 A L A R M S E T U P
↓
4 6 2 A L A R M D I A L I N G T A B L E 1
↓
4 6 3 A L A R M D I A L I N G T A B L E 2
↓
4 6 4 A L A R M D I A L I N G T A B L E 3
↓
↑ ↓
: M O V E E N T : S E L E C T E S C : P R V
4 6 1 A L A R M S E T U P
A L A R M T Y P E : L E V E L E D G E
A L A R M A U T O D I S C T I M E R : . . 0 S
A L A R M D I A L I N G T I M E T A B L E :
T A B L E D A Y T I M E
1 M O N - S U N 0 0 : 0 0 - 0 0 : 0 0
2 T U E - W E D 0 9 : 0 0 - 0 0 : 0 0
3 T H U - F R I 0 0 : 0 0 - 0 0 : 0 0
E N T : D A Y I N C . D E L : C L R
↑ ↓ ← →
: M O V E E S C : P R V
Move the cursor to the desired item by pressing the
▲
or
▼
button. Then press the ENTER button.
The selected item submenu appears on the monitor screen.
• 461 ALARM SETUP
Set the following items
•Alarm input methods
•Alarm dialing schedule
• 462 to 464 ALARM DIALING TABLE 1 to 3
Specifies the destination to be called when an alarm is
received from the associated alarm sensor.
●
Alarm Setup [461]
1
Move the cursor to item 461 by pressing the
▲
or
▼
button. Then press the ENTER button.
The
[461 ALARM SETUP]
menu appears on the monitor
screen.
2
Move the cursor to the ALARM TYPE
parameter. Then select a mode by pressing
the Direction buttons.
This item lets you select the signal type for the alarm or
sensor input.
• LEVEL:
Accepts an alarm signal that remains on for a specific
time.
While the associated alarm sensor is on, the alarm
transmission will continue.
• EDGE:
Accepts an alarm signal that is a short pulse.
d
