Panasonic VDR-M50GC, Instruction Manual

Page: 86 / 171

English
VQT0K98
87
123
Initial Settings
Switching Operating Sound On or Off (Beep)
1
Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press
the
A
button.
2
Select “On” or “Off”, and then press the
A
button.
3
Press the MENU button to end the setting.
Note
:
The “Beep” setting will be stored in memory even when the
DVD Video Camera is turned off.
Turning DVD Video Camera Off Automatically (Power Save)
1
Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press
the
A
button.
2
Select “On” or “Off”, and
then press the
A
button.
3
Press the MENU button to end the setting.
Note
:
•
To turn the DVD Video Camera on again from automatic
off activated by the power save function, set the power
switch to “OFF”, and then set it to “
”, “ ” or “ ”.
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD Video Camera is turned off.
Setting Content
On Beep is heard when the power switch is changed over, the REC button is pressed, etc.
Off No beep is heard.
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
ENTER RETURN
Re s e t
L a n g u a g e
R e c o r d LED
Setting Content
On To engage power save. If the DVD Video Camera is left in the recording pause status without
being operated for 5 minutes, it will automatically turn off to prevent the battery from discharging
needlessly.
Off To cancel power save
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
R e c o r d LED
ENTER RETURN
Re s e t
L a n g u a g e
255
ENG.book Page 87 Tuesday, March 23, 2004 8:12 PM