Panasonic VDR-M50GC Instruction Manual Download

Page: 135 / 171

English

VQT0K98

136

Installing MyDVD

My DVD included in the provided CD-ROM does not contain the slideshows function. Therefore you can
not edit the stills on MyDVD.

Insert the provided CD-ROM into the PC, and
Click “MyDVD 4.0” on the “Setup Menu” screen.

If the “Setup Menu” screen will not appear,
double-click the CD-ROM drive icon.

The screen for installing “MyDVD” will appear:
Click “Next”.

Carefully read the Software License Agreement:
If you accept it, click “Yes”.

After you accept the Software License
Agreement, “Choose Destination Location” will
appear. If you do not wish to change the folder
where the software is installed, click “Next”.

Check the contents, and then click “Next”.
Installation will start.

Click

304

ENG.book Page 136 Tuesday, March 23, 2004 8:12 PM

Summary of Contents for VDR-M50GC












































































































































































Search results

Summary of Contents for VDR-M50GC

Reviews:

Related manuals for VDR-M50GC

Brands by name

Popular brands

Panasonic VDR-M50GC, Instruction Manual

Search results

Summary of Contents for VDR-M50GC

Reviews:

Related manuals for VDR-M50GC

Brands by name

Popular brands