Panasonic VDR-M50GC, Instruction Manual

Page: 121 / 171

English
VQT0K98
122
1
Updating Control Information of DVD-RAM Disc (Update Control Info.)
Disc Navigation in this DVD Video Camera handles information on scenes, such as skip, fade, in a
particular manner. If you use another device to edit a disc recorded on this DVD Video Camera, and then
use the data again with Disc Navigation in this DVD Video Camera, the Disc Navigation may not appear
normally. If this happens, use the Update Control Info function to update the data.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Choose “Update Control Info.” on the “Disc”
menu screen, and then press the
A
button.
The screen for verifying “Update Control Info.”
will appear.
4
Choose “YES”, and then
press the
A
button.
The message for
proceeding will appear,
and then the Disc
Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
Choose “NO” to cancel updating.
5
Press the
C
button to quit.
Note
:
•
Be sure to use the AC adaptor/charger when updating the
control information so that the DVD Video Camera is not
turned off midway. If updating of control information is
interrupted by power off, the control information will not
be updated correctly.
•
It may take time to update the control information if the
disc has many recorded scenes.
•
Pressing the
C
button on the screen for verification will
restore the thumbnail display screen.
Before You Begin
• When using the AC adaptor to power the DVD Video Camera for updating
control information, make sure that power is not turned off during updating:
If the DVD Video Camera is turned off during updating and the updating
is interrupted, the control information will not be updated correctly.
ENTER
U p d a t e C o n t r o l I n f o ?
U p d a t e C o n t r o l I n f o.
YES NO
290
ENG.book Page 122 Tuesday, March 23, 2004 8:12 PM