Panasonic VDR-M50GC, Instruction Manual

Page: 31 / 171

English
VQT0K98
32
Setups
This section explains preparations for recording - setting up the DVD Video Camera and battery.
Setting Up the DVD Video Camera
Holding DVD Video Camera
To use as a Grip Belt
Insert your right hand from the bottom of DVD Video
Camera up to the base of your thumb.
Put your hand in a position where you can easily
operate the REC button and the Zoom lever.
Adjust the length of hand strap so that the DVD
Video Camera is stable when you press the REC
button with your thumb.
1) Detach the belt.
2) Adjust the length of grip belt.
3) Attach the belt.
Note
:
Do not adjust the hand strap while holding the DVD Video
Camera: Doing this could cause the DVD Video Camera to
fall and be damaged.
To use as a Hand Strap
Using the Grip Belt as the hand strap makes it easier to carry the DVD Video Camera.
1
Detach the Grip Belt from the Video Camera.
1) Open the Lock cover. 2) Push the Lock button and pull the grip belt
from the DVD Video Camera.
Support the DVD Video Camera securely by
the hand to avoid falling.
2
Make it a hand strap.
1) Turn over the belt.
2) Pull the tip in the direction of the
arrow.
3) Attach the belt.
Lock cover
Lock cover
Lock button
Open the lock cover while pinching the protection
portion of both ends. Return the lock cover after pulling out the
grip belt.
200
ENG.book Page 32 Tuesday, March 23, 2004 8:12 PM