Panasonic UF 890 - Panafax B/W Laser, Service Handbook

Page: 30 / 94

30
068 NYSE FAX FOR-
WARD
1 = Off
2 = On Selects whether the machine will
forward the incoming and outgoing
faxes to a specified station.
Note:
Once this parameter is activated, Fax
Forwarding via Fax Parameter 054 is
automatically disabled.
069 NYSE LOCAL PRINT 1 = Inc
2 = On (Always)
Selects the printing condition for the
incoming faxes after FAX Forwarding.
Inc.: Prints only if FAX Forwarding fails.
On: Always prints.
070 LINE ERROR 1 = 128 lines
2 = 256 lines
3 = 512 lines
4 = 1024 lines
5 = 2048 lines
6 = Off (will not disconnect
line) 1.Selects the line disconnect condition
during reception. If the number of line
errors exceed this setting, the unit will
disconnect the line.
2.Selects the transmit condition of RTP/
PIP or RTN/PIN. (Available if No.73
ERROR DETECT is set to "LINES")
(See Note 1)
071 TOTAL ERROR 1 = 5%
2 = 10%
3 = 15%
4 = 20% Selects the transmit condition of RTP/
PIP or RTN/PIN.
(Available if No.73 ERROR DETECT is
set to "RATE") (See Note 2)
072 CONTINUOUS
ERROR
1 = Off (unlimited)
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD Selects the continuous total error criteria
of Off/3/6 or 12 lines in Standard mode.
If continuous total error exceeds this
setting, the unit will transmit RTN/PIN.
(Available if No.73 ERROR DETECT is
set to “RATE”.)
073 ERROR DETECT 1 = Lines
2 = Rate Selects the error detect condition Lines/
Rate.
074 RTN RECEIVE 1 = Disconnect
2 = Continue Selects whether to disconnect the
phone line or continue when "RTN" is
received.
075 MH/MR/MMR/JBIG 1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR (MH or MR or
MMR)
4 = JBIG Selects the coding scheme.
076 Not used
077 RX JAM LENGTH 1 = Off (unlimited)
2 = 2 m
3 = 8 m Selects the maximum length of a
received document that can be printed.
078
079 Not used
080 DOC TOP FEED -5.0 mm
~
+5.0 mm Adjusts the distance between the
scanning sensor ON position and the
scanning start position.
081 DOC END FEED -5.0 mm
~
+5.0 mm Adjusts the distance between the
scanning sensor OFF position and the
scanning end position.
Function Parameter Table
No.
Parameter
(see Note 3)
Selections Function