Panasonic UF 890 - Panafax B/W Laser, Service Handbook

Page: 55 / 94

55
4.1.6 Service Mode 6 (RAM Initialization)
Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
RAM Initialization Table
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “6”.
5 Press ”/\” or “\/“ to select the initialization mode.
(See Note)
6 Press “START”.
7 Return to step 3 and press “STOP” to return to standby.
No. Initialize Mode Description
99 SHIPMENT SET (A) Deletes all setting information, except parameter num-
ber 80 and 81, then set default values.
98 SHIPMENT SET (B) Deletes all setting information, except parameter num-
ber 61, 80 and 81, then set default values.
97 FLASH MEMORY
CLEAR Deletes all information in the Flash Memory.
1# MANUFACTURE SET Factory use only. DO NOT USE IN THE FIELD.
16 LBP ERROR LOG
CLEAR Clears the Printer Error Log.
15 LOGO/ID/PSWD
CLEAR Clears the Logo, ID, Polling Password.
14 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.
13 PROGRAM DIAL
CLEAR Clears the Program keys.
12 ABBR. DIAL CLEAR Clears the One-touch and ABBR. Numbers.
11 JOURNAL CLEAR Clears the Journal contents.
* PARAMETER
INITIALIZE Restores the Fax and Function Parameters to default
values.
OCT-12-2001 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
* RAM INITIALIZE *
ENTER NO. OR
* RAM INITIALIZE *
LOGO/ID/PSWD CLEAR
* COMPLETED *
LOGO/ID/PSWD CLEAR
OCT-12-2001 15:00
00%