Panasonic UF 890 - Panafax B/W Laser, Service Handbook

Page: 31 / 94

31
082 JAM LENGTH 1 = 1 m
2 = 2 m
3 = 8 m
4 = Unlimited Selects the maximum length of the
document that can be scanned.
083 Not used
084 LINE AS NO PAPER 1 = Ring (ring)
2 = Busy (keep line busy) Selects whether to ring or send a busy
tone to the remote station when the
recording paper runs out or the unit
cannot receive because of any trouble.
085 Not used
086 REDUCTION FINE 1 = Off
2 = On Selects whether the resolution is preset
to Fine, when sending with reduction
B4
→
A4.
087 DARKER LEVEL 0 = Lightest Contrast
~
15 = Darkest Contrast Selects the contrast level.
0
← →
15
Lightest
← →
Darkest
088 NORMAL LEVEL
089 LIGHTER LEVEL
090 Not used
091 Not used
092 SMOOTHING 1 = Off
2 = On Selects whether the smoothing function
is available.
093
~
129
Not used
130 BUSY-ACK TIMING • In Busy
• While Busy
• After Busy Selects the signal timing between the
BUSY and ACK signal in Printer
Interface Mode.
131 CMD RCV GRD
TIMER
1 min.
~
15 min. Selects the Guard Timer between each
GDI Command in Printer Interface
Mode.
132 PRT DATA TIMER 1 min.
~
15 min. Selects the Guard Timer between each
GDI Data Frame in Printer Interface
Mode.
133 COLLATION (PRT) 1 = Off
2 = On
3 = Auto Selects the Print Collation in Printer
Interface Mode.
When “Auto” is selected, print collation
will operate according to the setting in
Fax Parameter #65.
135 JOB END TIMER 1 sec.
~
999 sec. Selects the Guard Timer while printing
data with the Panafax Printing System
ver. 6.
136 JAM RECOVERY 1 = Off
2 = On Selects the JAM Recovery function in
the PDL Printer Mode.
Off: Printing performance is faster,
however if a paper jam occurs the
jammed pages will not be reprinted
automatically.
On: Printing performance is slower,
however if a paper jam occurs the
jammed pages will be reprinted
automatically.
Function Parameter Table
No.
Parameter
(see Note 3)
Selections Function