18
051 RCV
COPY
-
Printer Motor is abnormal.
Connector not properly
connected.
Defective Printer Motor.
Defective LPC PCB.
054 STANDBY
RX
COPY
-
HSYNC is abnormal.
Laser motor is abnormal.
Defective Laser Unit.
055 STANDBY
RX
COPY
-
No response of LBP CPU on LPC. Defective LPC PCB.
Defective FCB PCB.
058 -
A
Interface error occurred with the
500-sheet optional cassette feeder.
Defective CST3 PCB.
059 RCV
COPY
C
Interface error occurred between
FCB PCB and LPC PCB.
Defective LPC PCB.
Defective FCB PCB.
060 -
A
Printer Cover is open.
Cover is not firmly closed.
Connectors are not firmly
connected.
061 -
A
ADF Door is open.
Cover is not firmly closed.
Connectors are not firmly
connected.
063 -
A
Jam Access Cover is open.
Cover on the optional 2nd
cassette is not closed.
064 -
A
Jam Access Cover is open.
Cover on the optional 3rd cassette
is not closed.
212 XMT
RCV
A-E
Interface error occurred between
the CPU and modem.
Modem is defective. (FCB PCB)
Software problem occurred.
(FCB PCB)
301 XMT
RCV
-
System fault.
Software problem occurred.
(FCB PCB)
302 XMT
RCV
-
No response of 2nd G3 PCB.
2nd G3 PCB defective.
331 XMT
C
8-minutes timer error.
(Germany only)
360 -
-
Incomplete initialization for EP
PCB.
EP PC Board incorrectly installed
on the FCB PC Board.
FRM PC Board incorrectly
installed on the EP PC Board.
Defective EP PC Board.
Defective FRM PC Board.
Defective FCB PC Board.
361 -
-
DPRAM (Dual Port RAM) initializa-
tion error on EP PCB.
EP PC Board incorrectly installed
on the FCB PC Board.
FRM PC Board incorrectly
installed on the EP PC Board.
Flash ROM on the FRM PC Board
is blank.
Defective EP PC Board.
Defective FRM PC Board.
Defective FCB PC Board.
362 -
-
Command Sequence Error.
Software problem occurred. (FCB/
FRM PCB)
Information Codes
Code
Mode
Phase
Description of Problem
Cause
Summary of Contents for UF 890 - Panafax B/W Laser
Page 68: ...68 NOTE...
Page 94: ...E...
