3
- 34
2WAY SYSTEM
Outdoor Unit Repair Procedures
3
9. Compressor
(7) Remove the 3 bolts, and remove the washers and rubber washers.
(8) Disconnect the discharge tubing.
(9) Disconnect the suction tubing.
Remove the cushioning rubbers and
lower the compressor position to
disconnect the tubing easily.
Be sure to remove the thermistor.
Cover the vibration-proof material with wet cloth.
First, insert something between the compressor and
discharge tubing to protect from damage. Then, take
up the discharge tubing using a crowbar as a lever.
Remove the cushioning rubber using
a crowbar.
* Place something at the contact to
protect the bottom plate from damage.
First, insert something between the compressor and
suction tubing to protect from damage. Then, take up
the suction tubing using a crowbar as a lever.
NOTE
If oil remaining in the compressor reaches the equalized oil level, oil will come pouring out when the
tube-with-flare-nut is removed.
Protect the sensors and the surrounding plates, rubber, lead wires, clamps, and other
items. Remove the discharge sensor.
CAUTION
SM830186-00̲2WAY ECO-i.indb 34
SM830186-00̲2WAY ECO-i.indb 34
2010/12/08 14:27:42
2010/12/08 14:27:42