3
- 35
2WAY SYSTEM
Outdoor Unit Repair Procedures
3
9. Compressor
(10) Pull the compressor toward you.
Remove the inverter compressor from the space
between the AC1 compressor and service valves. Be
careful not to damage cross oil tubing.
Installtion
(1) Remove the rubber stopper and tube cap (brazed) from the new compressor.
(2) Install the crankcase heater onto the new compressor.
(3) Place the 1 piece of cushioning rubber in the designated positions on the compressor.
(4) Place the new compressor.
When setting the compressor into the unit, be careful not to cause any abnormal
deformation of the tube-with-flare-nut.
CAUTION
First, temporarily fix the cushioning
rubber and bolt in the back. Then,
place the compressor.
After the position in the back is fixed,
adjust the two positions in front using
a crowbar.
* Place something at the contact to
protect bottom plate coating from
damage.
SM830186-00̲2WAY ECO-i.indb 35
SM830186-00̲2WAY ECO-i.indb 35
2010/12/08 14:27:43
2010/12/08 14:27:43