Panasonic TY-SP42PM3W, Installation Manual

Page: 8 / 59

Ceiling unit Fixing bolt (M8-12) x 2
Ceiling unit
Allen key
Fixing bolt (M8-100)
Spring washer
Washer pan nut (M8)
Fixing screw (M5) x 2
Fixing bolt (M8-20) x 2
Cable tie x 2 Pan head bolt with hex socket
(M8-45) x 4
Toothed pan washer x 4
Insulating spacer x 4
Points to note during installation
•
T h i s c e i l i n g u n i t i s fo r m o u n t i n g a W i d e P l a s m a D i s p l ay t o a c e i l i n g fo r v i ew i n g p u r p o s e s.
Do not use it for any type of installation other than ceiling mounting.
•
In order to ensure correct, problem-free operation of the Wide Plasma Display, do not install the Display in any of
the following places:
• Next to sprinklers or sensors
• Where it may be subject to vibration or shocks
• Near high-voltage wires or electric motors
• Where it may be in direct contact with air from heaters
•
When installing this ceiling unit, use a fixing method appropriate to the type of ceiling.
•
Insert the mains plug for the Wide Plasma Display into a mains socket which is close and easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise above 40
°
C (104 F
°
).
If there is insufficient movement of the air inside the display, heat may build up inside the display and fire may result.
•
For U.S.A (TH-42PW3 / TH-42PWD3 only)
If the connection cable cannot reach the Display when it has been installed to the wall, use the 15 m cable (TY-
SCP15C03) which is sold separately.
Speakers
Speaker x 2 Bracket mounting
Assembly screw (M4-10) x 12
Mounting bracket
(right) x 2
Mounting bracket
(left) x 2
Sponge x 2
Speaker cable
(20 cm) x 2