Lift the display unit so that the upper insulating spacers at the back
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
1
1) Lift the display unit slightly and insert the lower insulating spacers
at the back of the display unit into the lower cutouts in the wall-
hanging bracket.
2) Lower the display unit into the lower notched part of the cutouts.
2
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
Insert and fasten the
screws at both the left and right sides.
3
To prevent the display unit
from becoming detached
from the wall-hanging
bracket, make sure that
both the left and right
fixing screws are properly
fitted.
Attaching the display unit to the wall-
hanging bracket
Notches
Insultating spacer
Holding bracket
Fixing screws(left and right)
Fixing screw(M5)
4-
6
Summary of Contents for TY-SP42PM3W
Page 10: ......
Page 31: ...4 3 Installation diagram For Multi Screen Units mm 90 120 Installe lower panel unit first ...
Page 45: ...Description Installation diagram Units mm in 626 926 Ceiling board 5 0 4 3 1 660 89 6 2 ...
Page 59: ...Matsushita Electric Industrial Co Ltd Central P O Box 288 Osaka 530 8692 Japan ...
