Panasonic TY-SP42PM3W, Installation Manual

Page: 26 / 59

Fixing the display unit to the stand
Lock the casters before
installing the display unit.
Press down the caster
switch to lock the caster.
Unlock
Lock
1) Spread a clean cloth over a level floor or base, and place on it the
display unit face down.
2) Remove the screws and covers.
Keep them in a safe place for possible future use.
1
Insert the two poles at the top of the stand into the holes in the base of
the display unit as shown in the illustration below.
2
Insert the four screws, two on each side, into the holes in the back of
the display unit and fasten them into the holes in the inserted poles.
3
Assembly screw (M5-30)
3-
4