59
CAUTION
Hard Disk Drive
To Change Your Hard Disk Drive, Contact Panasonic Technical Support
To customers:
To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk. The hard disk is extremely sensitive to
shock. In addition, static electricity could later affect some internal components.
Installing/Removing the Hard Disk
(For technicians at Panasonic Technical Support)
3
Removing the hard disk
While pulling the tab in the direction indicated by the arrow (A),
lift the hard disk.
Remove the hard disk.
Tab
2
Remove the main battery pack
(
page 32
)
1
Power off your computer
(
"Starting Up/Shutting Down")
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor.
Insert the hard disk as shown in the figure.
Put the hard disk in place.
Connect the hard disk (via the hard disk connector) to the com-
puter.
Installing the hard disk
4
Insert the battery pack and then put the battery pack
cover back into place
(
page 32
)
(A)
