Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
97
Wall mounting
Base unit
The base unit can be mounted on a wall phone plate.
1
Tuck the telephone line cord inside the wall mounting adaptor.
2
Insert the upper hooks (
A
), then the lower hooks (
B
) on the wall mounting adaptor into
the holes on the base unit until it clicks into the place.
3
Connect the telephone line cord. Mount the base unit by inserting the mounting pins
into the round openings on the adaptor (for pin
B
, use round cut out at the bottom of
the adaptor if you’re using the 4 inches phone plate), then sliding the base unit down
to secure it.
Connect the AC adaptor to power outlet (page 15).
L
There are two common types of wall phone plates. The distance between
A
and
B
may vary depending on the size of the wall phone plate installed.
L
Raise the antennas.
A
B
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
(120 V AC, 60 Hz)
102 mm
(4 inches)
83 mm
(3
1
/
4
inches)