Useful Information
106
For assistance, please visit http://www.panasonic.com/phonehelp
Programmable settings
Making/answering calls, intercom
Problem
Cause & solution
I cannot program items.
L
While another user is listening to messages or the
answering system is answering a call, you cannot
program. Try again later.
While programming, the
handset starts to ring.
L
A call is being received. Answer the call and start again
after hanging up.
Problem
Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances (microwave, wireless LAN
appliance, etc.).
L
Move closer to the base unit.
L
Raise the base unit antennas.
L
Turn on the clarity booster feature (page 33).
L
If your base unit is connected to a telephone line with
DSL service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset and base
unit do not ring.
L
The ringer volume is turned off. Adjust it (page 69, 90).
I cannot make a call.
L
The dialing mode may be set incorrectly. Change the
setting (page 29).
L
The base unit (including answering system) or another
handset is in use. Try again later.
I cannot redial by
pressing
{
REDIAL
}
.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
I cannot have a
conversation using the
headset.
L
Make sure that a Panasonic optional headset is
connected properly (page 102).
L
Your optional Bluetooth headset is not registered.
Register it (page 102).
L
If “
SP-phone
” is displayed on the handset, press
{C}
to switch to the headset.
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the
handset or base unit.
L
The called handset is too far from the base unit.
L
The called unit is in use. Try again later.
